heliXcyto
consumables

Order No. Information
CY-S1-1 heliXcyto S1 chip
Chip with 1 cell trap for the immobilization of cells approx. 6 -12 μm.
CY-M1-1 heliXcyto M1 chip
Chip with 1 cell trap for the immobilization of cells approx. 12 -20 μm.
CY-L1-1 heliXcyto L1 chip
Chip with 1 cell trap for the immobilization of cells approx. 20 -25 μm.
CY-S5-1 heliXcyto S5 chip
Chip with 5 cell traps for the immobilization of cells approx. 6 -12 μm.
CY-M5-1 heliXcyto M5 chip
Chip with 5 cell traps for the immobilization of cells approx. 12 -20 μm.
CY-L5-1 heliXcyto L5 chip
Chip with 5 cell traps for the immobilization of cells approx. 20 -25 μm.
MTC-0 Maintenance chip
Chip with microfluidics for cleaning purposes, maintenance operations and testing of device fluidics.
Order No. Information
CCK-1-1 heliXcyto chip cleaning kit
Detergent and enzyme basedsolutions for manual cleaning of heliXcyto chips. Yields: 1 mL cleaning solution 1 and 1 mL cleaning solution 2.
CY-LK-R1-1 heliXcyto labeling kit red dye 1
NHS-mediated labeling of biomolecules with a red fluorophore. Contains 5 reactions for 25 -200 μg protein each.
Order No. Information
SP-HLX-3 Starter pack heliXcyto 
Contains 12 products to get you up and running quickly on your first experiments: 1 x CY-M5-1, 1 x MTC-0, 1 x NOR-0, 1 x CY-LK-R1-1, 1 x BU-RB-10-1, 1 x CS-100-1, 1 x CS-50-2, 1 x PLU-10-1, 1 x WP-096-650-8, 1 x WP-SEAL-HLX, 1 x AV-015-100N, 1 x AV-100-100.
SP-HLX-4 Starter pack heliXcyto, heliX+, and proFIRE®
Contains 25 products to get you up and running quickly on your first experiments: 1 x CY-M5-1, 1x ADP-48-2-0_3, 1 x MTC-0, 1 x NOR-0, 1 x CY-LK-R1-1, 1 x BU-RB-10-1, 1 x CS-100-1, 1 x CS-50-2, 1 x PLU-10-1, 1x WP-096-650-8, 1x WP-SEAL-HLX, 1x AV-100-100, 1x AV-015-100N, 1x PF-CC-1, 1x SY-250-1, 1x BU-P-150-10, 1x BU-P-1000-5, 1x BU-PE-140-10, 1x BU-TE-40-10, 1x SOL-PAS-1-5, 1x SOL-REG-1-5, 1x HK-NHS-1, 1 x ASP-1-Ra, 1x TS-0, 1x DK-FT-KT-1.
Order No. Information
NOR-0 Normalization solution
For normalization of fluorescent signals on spot 1 and 2 of a heliXcyto chip. Contains: 3 red and 3 green solutions (each 100 μL).
BU-RB-10-1

10 x RT-IC running buffer 1 (RB 1)
50 mL of: 1.37 M NaCl, 26.7 mM KCl, 14.7 mM KH2PO4, 81 mM Na2HPO4, 0.1 % Pluronic, without calcium, without magnesium; Yields 500 mL of: 137 mM NaCl, 2.67 mM KCl, 1.47 mM KH2PO4, 8.1 mM Na2HPO4,
0.01 % Pluronic, without calcium, without magnesium.

BU-DP-10-1 10 x RT-IC DPBS buffer
50 mL of: 1.37 M NaCl, 26.7 mM KCl, 14.7 mM KH2PO4, 81 mM Na2HPO4, without calcium, without magnesium; Yields 500 mL of: 137 mM NaCl, 2.67 mM KCl, 1.47 mM KH2PO4, 8.1 mM Na2HPO4, without calcium, without magnesium.
PLU-10-1 Pluronic solution
Biocompatible non-ionic surfactant for foam-free fluid flow. Contains 10 mL.
CS-100-1 Cleaning solution 1 for heliXcyto
Detergent-based solution for everyday cleaning procedures of heliXcyto and heliXcyto chip (100 mL).
CS-50-2 Cleaning solution 2 for heliXcyto
Enzyme based solution for intensive cleaning procedures of heliXcyto and heliXcyto chip. Pack of 10 aliquots (each 25 mg) and 50 mL Tris-HCl buffer.
Order No. Information
FIL-02-1 Filter unit 0.2 µm
Filter unit for the removal of particels > 0.2 µm from buffers.
Contains 1 filtering unit including 500 mL bottle.
FIL-30-20 Cell filter
Cell strainers for uniform single cell suspensions and removal of aggregates > 30 µm. Pack of 20.
WP-096-280-10 Microplate 96 well, 280 µl
PP, V-bottom, 10 pcs.
WP-096-650-8 Microplate 96 well, 650 μl
PP, V-bottom, 8 pcs.
WP-096-2000-1 Microplate 96 well, 2000 µl
PP, V-bottom, 1 pc.
WP-384-225-6 Microplate 384 well, 200 µl
PP, V-bottom, 6 pcs.
WP-SEAL-HLX Sealing for 96 and 384 well plates
(self-adhesive), 10 pcs.
WP-SEAL-HOT Sealing for 96 and 384 well plates
(only for heat sealing), 10 pcs.
AV-015-100N Autosampler vials 1.3 ml (glass)
1.3 ml autosampler vials and caps, 100 pcs.
AV-100-100 Autosampler vials 10 ml (glass)
10 ml autosampler vials and caps, 100 pcs.
PF-DR-10 Dye removal columns
Purification spin column for removal of dye, 10 pcs.